
Growing Hemp
Hemp (Cannabis sativa) is a fast-growing summer annual raised for fiber, grain or CBD. This guide covers fiber hemp, grown thick and tall for the strong fiber in its stalks. It grows readily here in Southwest Missouri (Zones 6b–7a), but it’s the one crop on this site you can’t plant without a license, so start there.
The license comes first
Missouri’s own hemp program ended in 2022. Since January 1, 2023, Missouri growers have been licensed by the U.S. Department of Agriculture instead, and you need that license before you plant any hemp, however small the plot. Licensed growers report their plantings to USDA’s Farm Service Agency, a certified sampler takes samples for THC testing shortly before harvest, and a crop that tests over the legal THC limit generally has to be destroyed.
The rules change often. Before you order seed, check USDA’s hemp program and MU Extension’s Industrial Hemp: History, Regulations and Licensing for the current requirements.
At a glance
- Sun: full sun
- Water: about what corn or soybeans need; doesn’t tolerate wet, poorly drained ground
- Soil pH: 6.0–6.5
- Sow: directly in the field, in May
- Depth: ¼–¾ inch, aiming for ½ inch
- Spacing: sown thickly in narrow rows, about 500,000 plants per acre (roughly 11 per square foot)
- Harvest: when about 20% of the male plants are flowering, before seed sets
- License: required; see above
Varieties
Choose a variety bred for fiber, not for CBD or grain. Fiber types grow tall and slender and do best in narrow rows. Hemp flowers in response to day length, and varieties bred for different latitudes behave differently, so ask your seed supplier which do well at our latitude. Futura 75, USO 31 and Carmagnola are long-established fiber varieties. Germination varies a lot between seed lots, so test yours before planting and adjust how much you sow.
When to plant
Around Springfield the average last spring frost is about April 10, and the first fall frost comes around October 22. Sow fiber hemp in May, once the soil has warmed: seed sprouts well between 55 and 80°F, and best at 60–68°F for varieties from northern latitudes.
Earlier planting gives the plants more time to grow tall before they switch to flowering, which starts a few weeks after the longest day in June. Plant too early, though, into cold soil, and the seed comes up slowly and unevenly, and seedling blight and weeds get a head start.
Soil and site
Hemp wants productive, well-drained soil with a pH of 6.0–6.5. Avoid poorly drained ground and compacted soil, where stands fail. Pick a spot with as few weeds as possible and start with a clean, weed-free bed. Have the soil tested about six months before planting, so you know what it needs.
Planting
- Work the soil into a firm, fine seedbed. Seed needs good contact with the soil, and broadcast seed comes up unevenly, so sow it in rows.
- Sow ¼–¾ inch deep, aiming for ½ inch.
- Sow thickly in narrow rows, about 7½ inches apart. Dense planting gives the tall, pencil-thin stalks, under ½ inch across at the base, that make the best fiber.
- Seedlings struggle where the soil crusts after a hard rain or stays wet, so drainage matters.
Water, weeds and feeding
- Water: hemp uses about 25–30 inches of water over a season, much like corn and soybeans. Normal rainfall covers most of that; water during dry spells, but don’t overdo it.
- Weeds: the first 30 days after the seedlings come up are what count. Hoe or hand-weed until the crop is tall enough to shade the rows. Very few weed killers or pesticides are labeled for hemp, and using any product on a crop its label doesn’t list is illegal.
- Feeding: follow your soil test. In early research, 50–100 pounds of nitrogen per acre (roughly 1–2 pounds per 1,000 square feet) raised fiber yields, and more didn’t help.
Pests and diseases
Pests
- Corn earworm: caterpillars that feed on the plants. Research hasn’t yet shown how much leaf feeding costs a fiber crop.
- Japanese beetles: chew leaves in summer. Knock them into a cup of soapy water in the morning.
Diseases
- Fusarium: several of the Fusarium fungi that attack other crops infect hemp too.
- Root-knot nematodes: hemp is a host for these soil pests.
- Seedling blight: mostly a problem when seed goes into cold, wet soil.
Well-drained ground, warm soil at sowing and a clean start against weeds prevent most problems.
Harvest
Cut fiber hemp when about 20% of the male plants are flowering, before any seed sets. Male plants flower and die back earlier than females, so watch them. On a small plot, cut the stalks with a sickle or scythe; on larger fields, hay equipment works. Leave 4–6 inches of stubble.
Fiber makes up 20–30% of the stalk. It’s the outer layer, called bast; the woody core inside is called hurd.
Retting and processing
- Ret the stalks to loosen the fiber from the woody core. The simplest way is dew retting: leave the cut stalks lying in the field for 2–5 weeks while dew, rain and microbes do the work. Water retting, soaking the stalks, is the other method, but it takes a lot of water and leaves foul water behind.
- Dry the retted stalks thoroughly, below about 15% moisture, before you bundle and store them.
- Break the dry stalks to crush the woody core, then scutch them, scraping away the broken bits, and hackle, combing the fiber through finer and finer teeth to clean and straighten it.
The cleaned fiber can be spun into yarn or twine. The hurd is what goes into hempcrete.



